Sebring Sedan L4-2.4L (2007)
Combination Switch: Service and Repair
Removal
REMOVAL
NOTE: It is not necessary to remove the Steering Column Control Module (SCCM) from the steering column to replace the left multi-function switch
(2).
1. Disconnect and isolate the battery negative cable.
WARNING: Wait two minutes for the system reserve capacitor to discharge before servicing any airbag or steering column components.
2. Remove both the upper and lower shrouds from the steering column.
3. Remove the one screw (2) that secures the left multi-function switch (3) on the right side of the clockspring (1).
