Sebring Sedan L4-2.4L (2007)
13. Grasp rear of bulb and twist counterclockwise.
14. Pull headlamp bulb rearward and remove from front lamp unit.
TURN SIGNAL / SIDE MARKER
15. Disconnect and isolate battery negative cable.
16. Reach in through the opening in the front of the fender and disconnect the turn signal lamp electrical connector (1).
17. Twist the bulb socket (3) counterclockwise and pull rearward to remove.
18. Pull bulb from bulb socket (3).
Installation
BULBS
HEADLAMP HIGH BEAMS