Sebring Sedan L4-2.4L (2007)
8. Remove the hose clamps (5) attaching the fluid return hoses (7) to the power steering fluid cooler line (4). Separate the return hoses from the
cooler line.
9. Remove the return hose routing clamp screws (3) securing the return hose (7) to the frame rail.
10. Remove the return hose routing clamp screw (6) securing the return hose (7) to the frame rail.
11. Lower the vehicle.
12. Remove the return hose routing clamp screw (1) securing the return hose (7) to the body.
13. Remove the return hose from the vehicle.
Installation
INSTALLATION
1. Install the power steering return hose (7) into the engine compartment.
2. Install the return hose routing clamp screw (1) securing the return hose (7) to the body.
3. Raise and support the vehicle.
4. Install the return hose routing clamp screw (6) securing the return hose (7) to the frame rail. Tighten the screw to 19 Nm (14 ft. lbs.).
5. Install the screws (3) securing the return hose to the frame rail (2). Tighten the screws to 19 Nm (14 ft. lbs.).
6. Install the return hose onto the cooler line (4) and install the hose clamps (5).
