Sebring Sedan L4-2.4L (2007)
12.
Is the part number recorded in step 10e above, the same as the new pin shown on the "Flash File List" screen?
a.
Yes >> PCM controller reprogramming is not necessary. Proceed to step 13.
b.
No >> PCM controller will require flash reprogramming, proceed to PCM repair procedure. Start with step 7.
NOTE:
The following step is required by law when reprogramming a PCM and/or TCM.
13.
Type the necessary information on the "Authorized Modification Label" p/n 04275086AB and attach near the VECI label (Fig. 1).
POLICY:
Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
NOTE:The following Labor Operations are standard LOP's associated with Generic Module Replacement and Programming.
FAILURE CODE:
Disclaimer:
This bulletin is supplied as technical information only and is not an authorization for repair.