Sebring Sedan L4-2.4L (2007)
Air Bag Control Module: Service and Repair
Removal
Occupant Restraint Controller
OCCUPANT RESTRAINT CONTROLLER
1. Open hood.
2. Disconnect and isolate the battery negative cable.
WARNING: Wait two minutes for the system reserve capacitor to discharge before servicing any airbag components. Failure to do this
may result in serious or fatal injury.
3. Remove the center console.
4. Remove the ORC mounting nuts (2).
5. Disconnect the two ORC connectors (4 and 5).
6. Remove ORC (3) from vehicle.
ORC Jumper Harness
ORC JUMPER HARNESS
