Sebring Sedan L4-2.4L (2007)
8. Install the tire and wheel assembly (1). Install and tighten the wheel mounting nuts (3) to 135 Nm (100 ft. lbs.).
9. Lower the vehicle.
10. Connect the wheel speed sensor cable connector (1) to the body wiring harness connector (2).
11. Reposition the luggage compartment carpet as necessary.
12. Perform the Diagnostic Verification Test and clear any faults. See: Powertrain Management/Computers and Control Systems/Testing and
Inspection/Diagnostic Trouble Code Tests and Associated Procedures/Verification Tests/ABS Verification Test
