Sebring Sedan L4-2.4L (2007)
Solar Sensor: Service and Repair
Removal
REMOVAL
SEDAN MODEL
NOTE: Take the proper precautions to protect the front face of the overhead console from cosmetic damage while performing this procedure.
NOTE: Typical overhead console shown. Infrared sensor location may vary by model.
1. Disconnect and isolate the negative battery cable.
2. Remove the overhead console (1) from the headliner and place it on a workbench.
3. Remove the screw (2) that secures the infrared sensor (3) to the back of the overhead console and remove the sensor.
CONVERTIBLE MODEL