Sebring Sedan L4-2.4L (2007)
3. Remove the cover (1) from the remote positive battery terminal. Remove the starter harness positive cable retaining nut (4) and remove the cable
(3) from the remote positive battery post (2).
4. Raise vehicle on hoist.
5. Remove the starter harness negative cable retaining bolt (4) and remove the cable (5) from the engine block.
6. Remove the starter harness positive cable retaining nut (6) and remove the cable (2) from the starter positive battery post.
7. One at a time, trace any remaining starter harness retaining pushpins, fasteners and routing clips until the harness is free from the vehicle.
