Sebring Sedan L4-2.4L (2007)
13. Clean all foreign matter from the threads of the half shaft outer C/V joint.
14. Install the hub nut (1) on the end of the half shaft (2) and snug it.
15. While a helper applies the brakes to keep the hub from rotating, tighten the hub nut (3) to 132 Nm (97 ft. lbs.).
16. Install the tire and wheel assembly (1). Install and tighten wheel mounting nuts (3) to 135 Nm (100 ft. lbs.).
17. Lower the vehicle.
18. Perform wheel alignment as necessary.
