Sebring Sedan L4-2.4L (2007)
Power Steering Fluid Cooler: Service and Repair
Installation
INSTALLATION
1. Install the power steering fluid cooler line (3) to the bumper reinforcement (2) by installing the two cooler mounting push pins (4).
2. Install the fluid return hoses (1) on the cooler line (3). Install the hose clamps (5) on the hoses past the bead formed into the end of the cooler tube
and secure in place.
3. Install the lower fascia valance.
4. If equipped, install the belly pan below the engine.
5. Lower the vehicle.
6. Fill and bleed the power steering system.
7. Check for leaks.
