Sebring Sedan L4-2.4L (2007)
10. Slowly release the tension from the coil spring by backing off the compressor (1) drive completely. As the tension is relieved, make sure the upper
mount and bearing align properly. Verify the upper mount does not bind when rotated.
11. Remove the strut assembly from the spring compressor.
12. Install the strut assembly on the vehicle.
Disassembly
DISASSEMBLY
NOTE: The shock assembly must be removed from the vehicle for it to be disassembled and assembled.
For the disassembly and assembly of the shock assembly, use Strut Spring Compressor, teamPSE tool 223-7400, or the equivalent, to compress the coil
spring. Follow the manufacturer's instructions closely.
WARNING: Do not remove the shock rod nut before the coil spring is properly compressed. The coil spring is held under pressure. The coil
spring must be compressed, removing spring tension from the upper mounting bracket, before the shock rod nut is removed.
1. If both shocks are being serviced at the same time, mark both the coil spring and shock assembly according to which side of the vehicle the shock
is being removed from.