Sebring Sedan L4-2.4L (2007)
3. If equipped, install the wheel speed sensor (2) head into the rear of the hub and bearing.
4. Install the wheel speed sensor head mounting screw (1). Tighten the screw to 10 Nm (89 in. lbs.).
5. If equipped with rear disc brakes, install the brake rotor, disc brake caliper and adapter.
6. If equipped with rear drum brakes, install the brake drum and adjust as necessary.
7. Install the tire and wheel assembly (1). Install and tighten the wheel mounting nuts (3) to 135 Nm (100 ft. lbs.).
8. Lower the vehicle.
9. Pump the brake pedal several times to ensure the vehicle has a firm brake pedal before moving it.
