Sebring Sedan L4-2.4L (2007)
Clutch Slave Cylinder: Service and Repair
Installation
INSTALLATION
1. Install slave cylinder (1) to transaxle using new bolts.
NOTE: Torque three CSC body screws first, then torque the fluid tube attachment.
2. Torque slave cylinder-to-case bolts in three steps:
-
2 Nm (18 in. lbs.)
-
5 Nm (44 in. lbs.)
-
8.4 Nm (74 in. lbs.)
3. Install transaxle.
4. Bleed clutch hydraulic system.