Sebring Sedan L4-2.4L (2007)
Shift Cable: Service and Repair
T355 Manual Transaxle
Removal
REMOVAL
1. Remove the shifter.
2. Raise hood.
3. Remove the resonator.
4. Remove engine cover.
5. Remove air cleaner assembly.
6. Disconnect negative battery cable.
7. Disconnect cables (1) from the shift levers (3) at the transaxle.
CAUTION: Pry up with equal force on both sides of shifter cable isolator bushings to avoid damaging cable isolator bushings.
8. Squeeze cable retaining clips (2) and remove cables from bracket.