Sebring Sedan L4-2.4L (2007)
Front Door Window Regulator: Service and Repair
Window Regulator
Removal
REMOVAL
1. Remove door trim panel. Refer to Trim Panel.
2. Remove door glass.
3. Disconnect power window motor wire connector.
4. Remove carrier plate and transfer to bench.
5. Remove window motor fasteners (2).
6. Remove motor from regulator.
7. Loosen screws attaching regulator scissor channel to door panel.
8. Loosen bolts (1) attaching regulator to door panel.
9. Remove regulator from door panel.
10. Slide regulator rearward and rotate forward end of roller channel through access hole in door panel.
Installation
INSTALLATION