Sebring Sedan L4-2.4L VIN J (2004)
Rear Door Weatherstrip: Service and Repair
Front And Rear Door Opening Weatherstrip
FRONT & REAR DOOR OPENING WEATHERSTRIP
REMOVAL
1. Open door.
2. Remove door sill plate.
Fig. 7
3. Pull weatherstrip from pinch flange around door opening (Fig. 7).
INSTALLATION
Position the splice in the door opening weatherstrip in the center of the bottom of the opening and reverse the preceding operation.
1. Push weatherstrip on to pinch flange around door opening.
2. Install door sill plate.
3. Close door.
