Sebring Sedan L4-2.4L VIN J (2004)
Front Crankshaft Seal: Service and Repair
CRANKSHAFT OIL SEAL - FRONT
REMOVAL
1. Disconnect negative battery cable.
2. Remove accessory drive belts.
3. Remove crankshaft damper.
4. Remove timing belt.
5. Remove crankshaft sprocket using Special Tool 6793 and insert C-4685-C2 (Fig. 45).
CAUTION: Do not nick shaft seal surface or seal bore.
6. Use Tool 6771 to remove front crankshaft oil seal (Fig. 46). Be careful not to damage the seal surface of cover.
INSTALLATION
