Sebring Sedan L4-2.4L VIN J (2004)
Hose/Line HVAC: Description and Operation
A/C Discharge Hose/Line
The discharge line is made from reinforced rubber with a nylon liner on the inner walls. The line has a light weight aluminum fittings at the compressor
and condenser end. The O-rings used to seal the connections are made from a special type of rubber not affected by R-134a refrigerant. O-rings must
replaced whenever the line is removed and installed.
CAUTION: Use only O-rings specified for the vehicle. Failure to use correct O-ring will cause the connection to leak.
