chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

Campaign - Front Heated Seat Module/Wiring Replacement|Page 6365 > < Power Interrupt Connector/Switch|Description and Operation|Page 6356
Page 1
background image

Technical Service Bulletin # E12

Date: 060401

Campaign - Front Heated Seat Module/Wiring Replacement

April 2006

Dealer Service Instructions for:
Customer Satisfaction Notification E12
Heated Seat Control Modules

Models

2004 (JR) Dodge Stratus and Chrysler Sebring

NOTE

This notification applies only to the above vehicles equipped with heated front seats (sales code JPM) built from December 19, 2003 through
February 10, 2004 (MDH 121910 through 021012).

IMPORTANT

Some of the involved vehicles may be in dealer used vehicle inventory. Dealers should complete this repair on these vehicles before retail delivery.
Dealers should also perform this repair on vehicles in for service. Involved vehicles can be determined by using the VIP inquiry process.

Subject

The front heated seat control modules on about 400 of the above vehicles may cause the seat elements to overheat under certain operating conditions.
This could damage the seat covers.

Repair

The right and left side front heated seat control modules and wiring harnesses must be replaced.

Campaign - Front Heated Seat Module/Wiring Replacement|Page 6365 > < Power Interrupt Connector/Switch|Description and Operation|Page 6356