Sebring Sedan L4-2.4L VIN J (2004)
Fuel Rail: Service and Repair
REMOVAL - 4 CYLINDER
1. Perform fuel system pressure release procedure before servicing or starting repairs. Refer to Fuel System Pressure Release Procedure.
2. Disconnect negative cable from battery
Fig.11 Fuel Rail And Bracket
3. Remove wiring harness from fuel rail support bracket (Fig. 11).
4. Remove fuel rail support bracket.
Fig.12 Fuel Rail And Injectors
5. Disconnect the wiring connectors for fuel injectors harness (Fig. 12).
6. Remove wiring harness from fuel rail brackets.
7. Disconnect the connectors from the fuel injectors.
