Sebring Sedan L4-2.4L VIN J (2004)
volume of fluid need to apply the element increases.
Certain mechanical problems within the clutch assemblies (broken return springs, out of position snap rings, excessive clutch pack clearance, improper
assembly, etc.) can cause inadequate or out-of-range clutch volumes. Also, defective Input/Output Speed Sensors and wiring can cause these conditions.
The following chart identifies the appropriate clutch volumes and when they are monitored/updated.
SHIFT SCHEDULES
As mentioned earlier, the TCM has programming that allows it to select a variety of shift schedules. Shift schedule selection is dependent on the
following:
-
Shift lever position
-
Throttle position
-
Fluid temperature
-
Software level