Sebring Sedan L4-2.4L VIN J (2004)
Cruise Control Switch: Service and Repair
WARNING: IF REMOVAL OF AIRBAG MODULE IS NECESSARY, REFER TO RESTRAINT SYSTEMS.
REMOVAL
Speed Control Switch
The speed control switches is mounted in the steering wheel and wired through the clock spring device under the airbag module.
1. Remove the negative battery cable.
2. Turn off ignition.
3. Remove air bag, refer to the Restraint systems section.
Switch Top Mounting Screw
4. Remove the top mounting screw.
5. Rotate steering wheel so that the switch is in the 6 o'clock position. Remove 2 screws from the back side of the speed control switch.
6. Disconnect the electrical connector.