Sebring Sedan L4-2.4L VIN J (2004)
Valve Body: Service and Repair
Removal
REMOVAL
NOTE: If valve body is replaced or reconditioned, the TCM Quick Learn Procedure must be performed.
1. Disconnect battery negative cable.
2. Remove air cleaner assembly.
3. Disconnect gearshift cable from manual valve lever.
4. Remove manual valve lever from manual shaft.
5. Disconnect transmission range sensor (TRS).
6. Raise vehicle on hoist.
7. Remove oil pan bolts (Fig. 321).
8. Remove oil pan (Fig. 322).