Sebring Sedan L4-2.4L VIN X (2001)
6. Remove screws, next to floor shifter and in console storage compartment, attaching floor console to brackets on floor pan (Fig. 12).
7. Disconnect wire connector for floor console accessories at floor pan.
8. Remove console from vehicle.
NOTE: The grip portion of the parking brake lever will only fit through the wider lower portion of the slot in the floor console.
INSTALLATION
NOTE: The grip portion of the parking brake lever will only fit through the wider lower portion of the slot in the floor console.
1. Place floor console in position.
Fig. 13
2. Connect wire connector for floor console accessories at floor pan (Fig. 13).
3. Verify that the rear locator pin on the bottom of the storage bin is engaged to the slot in the body bracket and the front pin is engaged to the shift
mechanism.
4. Install screws, next to floor shifter and in console storage compartment, holding floor console to brackets on floor pan.
Fig. 14
