Sebring Sedan L4-2.4L VIN X (2001)
Rear Shelf: Service and Repair
REAR SHELF TRIM PANEL
REMOVAL
1. Remove upper quarter trim panels as necessary. Refer to Trim Panel.
2. Fold seat backs down.
Fig. 21
3. Remove the center plug (Fig. 21).
4. Remove close out panel trim.
Fig. 22
5. Remove push-in fasteners attaching rear shelf trim to shelf panel (Fig. 22).
6. Disconnect the center shoulder belt at the base.
7. Pull trim forward to disengage clip attaching trim to shelf panel.
8. Feed seat belt through the seat belt opening in the shelf panel.
CAUTION: Do not pull on child tether covers or use as a handle for removal of panel.
9. Remove shelf trim from vehicle.
