Sebring Sedan L4-2.4L VIN X (2001)
(9) Install seven screws attaching door trim panel to door: (Fig. 28) and (Fig. 29).
(a) One screw in the pull cup.
(b) One screw located inside handle opening.
(c) One screw located at the upper front.
(d) One screw is located at lower rear screw pocket.
(e) Three screws located along the bottom of door.
(10) Snap screw covers closed.
(11) Install three large washer headed screws rounding the speaker (Fig. 28).
(12) Install speaker grille by first engaging rear edge hinge flaps to mating slots, then pressing grille on to seat the two clips at front.
(13) Install red courtesy reflector by first engaging rear edge hinge flaps to mating slots, then snap front in to position.
(14) Install access cover at front of door trim panel. First engage slots at front, then snap in at rear edge (Fig. 29).
(15) Place flag trim panel into position and engage clips (Fig. 29).
