Sebring Sedan L4-2.4L VIN X (2001)
Power Door Lock Switch: Service and Repair
REMOVAL
1. Disconnect and isolate the battery negative remote cable.
2. Remove door trim panel, refer to Body, Door - Front, Trim Panel, Removal.
3. Disconnect switch wire connector.
4. Remove switch using a trim stick (special tool #C-4755) or equivalent.
INSTALLATION
1. Install the switch by snapping into place.
2. Connect switch wire connector.
3. Install the door trim panel, refer to Body, Door - Front, Trim Panel, Installation.
4. Connect the battery negative remote cable.
