Sebring Sedan L4-2.4L VIN X (2001)
Front Door Window Glass Weatherstrip: Service and Repair
Front Door Inner Belt Weatherstrip
FRONT DOOR INNER BELT WEATHERSTRIP
REMOVAL
1. Remove front door trim panel.
2. Pull upward at rear end of inner belt weatherstrip.
Fig. 9
3. Remove inner belt weatherstrip from vehicle (Fig. 9).
INSTALLATION
1. Place inner belt weatherstrip into position.
2. Start weatherstrip at the front and rear edge door. Press downward on the inner belt weatherstrip till it is fully seated.
3. Install front door trim panel.
