Sebring Sedan L4-2.4L VIN X (2001)
Wheel Speed Sensor: Service and Repair
Front
FRONT WHEEL SPEED SENSOR REMOVAL
This procedure is for the removal and installation of one of the two front wheel speed sensors.
1. Raise vehicle on jack stands or centered on a frame contact type hoist. See Vehicle Lifting for the required lifting procedure to be used for this
vehicle.
2. Remove the tire and wheel assembly from the vehicle.
3. Remove the speed sensor cable routing bracket from the steering knuckle. Remove the wiring harness sealing grommet retainer and speed sensor
routing bracket from the inner fender.
4. Remove speed sensor sealing grommet from the inner fender. Then unplug the speed sensor cable from the vehicle wiring harness.