Sebring Sedan L4-2.4L VIN X (2001)
Timing Belt Tensioner: Service and Repair
Updated Mechanical Tensioner Installation Information
INSTALLATION - TIMING BELT
1. Set crankshaft sprocket to TDC by aligning the sprocket with the arrow on the oil pump housing.
Fig. 102 Camshaft Sprocket Alignment
2. Set camshafts timing marks so that the exhaust camshaft sprocket is a 1/2 notch below the intake camshaft sprocket.
CAUTION: Ensure that the arrows on both camshaft sprockets are facing up.
