Sebring Sedan L4-2.4L VIN X (2001)
Service Port HVAC: Description and Operation
SERVICE PORT VALVE CORE
The high pressure service port is located on the discharge line between the compressor and the condenser over the cooling fans, near the front of
the engine compartment. The low pressure service port is located on the suction line, near the right strut tower.
Each of the service ports has a threaded plastic protective cap installed over it from the factory. After servicing the refrigerant system, always
reinstall both of the service port caps.
The two refrigerant system service ports are used to charge/recover/recycle/evacuate and test the air conditioning refrigerant system. Unique
service port coupler sizes are used on the R-134a system to ensure the refrigerant system is not accidentally contaminated with R-12 refrigerant or
refrigerant system service equipment.
