Sebring Sedan L4-2.4L VIN X (2001)
EGR Valve: Service and Repair
REMOVAL
The EGR valve and Transducer are to be replaced as an assembly.
1. Disconnect the negative battery cable.
2. Remove the air cleaner box.
Fig. 2 EGR Valve
3. Remove the 2 bolts EGR tube to EGR valve.
4. Remove the 2 bolts for EGR valve to cylinder head.
5. Disconnect the electrical connector from transducer.
6. Remove the vacuum hose from the EGR transducer.
7. Remove the EGR valve and transducer as an assembly
INSTALLATION
1. Loose install the EGR valve and transducer and gasket to cylinder head.
2. Install the 2 bolts from EGR tube to EGR valve.
3. Tighten bolts.
4. Connect the electrical connector to EGR transducer.
5. Connect the vacuum hose to EGR transducer.
6. Install the air cleaner box.
7. Connect the negative battery cable.