Sebring Sedan L4-2.4L VIN X (2001)
Fig. 30 Throttle Cable Bracket
7. Remove the throttle cable bracket (Fig. 30).
8. Remove throttle body and gasket.
INSTALLATION
1. Install a new gasket.
2. Install throttle body (Fig. 29).
3. Tighten throttle body mounting bolts to 11.7 ±2.25 Nm (105 ±20 in. lbs.) torque.
4. Install the throttle cable bracket (Fig. 30).
5. Connect electrical connectors to the idle air control motor and throttle position sensor (TPS).
6. Install the throttle cable shield.
7. Install air cleaner box (Fig. 28).
8. Connect negative cable to battery cable.
