Sebring Sedan L4-2.4L VIN X (2001)
Manifold Pressure/Vacuum Sensor: Specifications
MAP Sensor Plastic Manifold ...................................................................................................................................................................1.7 Nm (15 in. lbs)
MAP Sensor Aluminum Manifold .............................................................................................................................................................3.3 Nm (30 in. lbs)
The composite manifolds uses special Plastic screws. The factory installed Plastic screws can be removed and installed up to 5 times. Do not exceed the
specified torque. These screws must be installed slowly (less than 600 rpm) to avoid melting the parent material. There are service repair screws
available for repair. They require a higher torque than the original screws.
