Sebring Sedan L4-2.4L VIN X (2001)
Front Steering Knuckle: Description and Operation
DESCRIPTION
The steering knuckle is a single casting with legs machined for attachment to the vehicle's upper and lower control arm ball joints. The steering
knuckle also has machined abutments on the casting to support and align the front brake caliper assembly. The knuckle also holds the front drive shaft
outer C/V joint hub and bearing assembly. The hub is positioned through the bearing and knuckle, with the constant velocity stub shaft splined through
the hub. The outer C/V joint is retained to the hub and bearing assembly using a nut, nut lock and cotter pin.
OPERATION
The steering knuckle pots between the upper and lower ball joints. The steering gear outer tie rod end connects to the trailing end of each knuckle,
allowing the vehicle to be steered.
The center of the knuckle supports the hub and bearing and axle shaft.
