Sebring Sedan L4-2.4L VIN X (2001)
Lateral Stabilizer Rod: Service and Repair
REMOVAL
The rear suspension lateral links are only serviced as complete assemblies. The isolator bushings used in the lateral links are not serviced as separate
components.
CAUTION: Do not attempt to straighten or repair a lateral link. Do not apply heat to the lateral link adjusting screws or to the jam nuts, when
loosening or adjusting the lateral links.
FORWARD LATERAL LINK
1. Raise vehicle on jackstands or centered on a frame contact type hoist.
2. Remove the rear wheel and tire assembly from the side of the vehicle requiring lateral link removal.
Fig. 14
3. Remove the rear stabilizer bar attaching link from the forward lateral link.
4. Remove the nut, bolt and washer attaching the forward lateral link to the knuckle.
