Sebring Sedan L4-2.4L VIN X (2001)
Fig. 9
11. Remove the nut and washer attaching the trailing link to the rear knuckle. Use a wrench on the flat of the trailing link to keep it from turning when
removing nut.
Fig. 10
12. Remove the shock absorber clevis bracket to knuckle attaching nut and bolt.
13. Remove the knuckle assembly from the vehicle.
INSTALLATION
1. Install knuckle on clevis bracket of rear shock absorber. Then install clevis bracket to shock absorber attaching bolt with head of bolt facing rear of
vehicle.