Sebring Sedan L4-2.4L VIN X (2001)
Suspension Strut / Shock Absorber: Testing and Inspection
Rear
DIAGNOSIS AND TESTING - SHOCK ASSEMBLY
1. Inspect for damaged or broken coil springs.
2. Inspect for torn or damaged shock absorber dust shield.
3. Inspect for damaged lower spring isolator.
4. Lift dust boot and inspect shock absorber for evidence of fluid running from the upper end of fluid reservoir. (Actual leakage will be a stream of
fluid running down the side and dripping off lower end of unit). A slight amount of seepage between the shock absorber rod and shock absorber
rod seal is not unusual and does not affect performance of the shock absorber. Also inspect jounce bumpers for signs of damage or deterioration.
