Sebring Sedan V6-2.7L (2009)
8. Carefully pull the cover off of the seat to the hog rings (1).
9. Cut the hog rings attaching the seat cover to seat cushion foam.
10. Remove seat cushion cover from the foam.
Rear
REMOVAL
1. Pull upward at forward edge of the cushion (3) at each retainer loop of the rear seat cushion to disengage the retainer loops from cups in the floor
(2).
2. Guide the seat belts through the loops.
3. Remove the rear seat cushion from vehicle.
4. Disengage the J-hooks securing the seat cover to the cushion foam.
5. Cut the hog rings and discard.
6. Remove the cover from the foam.
