chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

Procedures|Page 2118 > < Procedures|Page 2116
Page 5
background image

NOTE: It is normal for the water pump to weep a small amount of coolant from the primary weep hole (black stain at weep passage). Do not

replace the water pump if this condition exists. Replace the water pump if a heavy deposit or a steady flow of engine coolant is evident
from the primary weep passage. This indicates a shaft seal failure and pump must be replaced. Coolant may leak from the secondary
weep passage and fill the valley of the engine. If this condition is found, clean the primary weep passage of debris. Be sure to perform
a thorough analysis before replacing water pump.

Procedures|Page 2118 > < Procedures|Page 2116