Sebring Sedan V6-2.7L (2009)
Valve Cover: Service and Repair
Cylinder Head Cover(s) - Removal
Left Cylinder Head Cover(s)
REMOVAL
1. Disconnect negative battery cable.
2. Disconnect electrical connectors from ignition coils and capacitor. Reposition electrical harness.
3. Remove ground strap from cylinder head cover stud.
4. Disconnect engine harness retaining clips (1) from cylinder head cover studs. Position the engine harness (3) aside.
5. Remove fastener attaching ignition coil capacitor.
6. Remove ignition coils See: Powertrain Management/Ignition System/Ignition Coil/Service and Repair/Ignition Coil - Removal.
7. Loosen all left cylinder head cover fasteners.
