Sebring Sedan V6-2.7L Flex Fuel (2007)
Fuel Injector: Service and Repair
Installation
2.7L
1. Lightly lubricate the fuel injector O-rings with a couple drops of clean engine oil.
2. Install fuel injectors.
3. Install retaining clips on fuel injectors.
4. Push injectors into fuel injector rail until clips are in the correct position.
5. Position fuel rail over cylinder head, and push rail into place. Tighten fuel rail mounting bolts to 11 Nm (100 in. lbs.).
6. Connect fuel supply tube quick connect fittings at the rear of intake manifold.
7. Connect electrical connectors to fuel injectors.
