Sebring Sedan V6-2.7L VIN R (2004)
Driver/Vehicle Information Display: Description and Operation
UNIVERSAL TRANSMITTER
Some JR models are equipped with a Universal Transmitter transceiver as standard factory-installed equipment. The universal transmitter transceiver is
located in the drivers side sun visor assembly. The only visible component of the universal transmitter are the three transmitter push buttons. The three
universal transmitter push buttons are identified with raised buttons and light indicators so that they can be easily identified by sight or by feel.
Each of the three universal transmitter push buttons controls an independent radio transmitter channel. Each of these three channels can be trained to
transmit a different radio frequency signal for the remote operation of garage door openers, motorized gate openers, home or office lighting, security
systems or just about any other device that can be equipped with a radio receiver in the 286 to 399 MegaHertz (MHz) frequency range for remote
operation. The universal transmitter is capable of operating systems using either rolling code or non-rolling code technology.
The universal transmitter cannot be repaired, and is available for service only as a unit. If any part of the component is faulty or damaged, the complete
assembly must be replaced.
The universal transmitter operates on a non-switched source of battery current so the unit will remain functional, regardless of the ignition switch
position. For more information on the features, programming procedures and operation of the universal transmitter, see the owner's manual in the vehicle
glove box.
