Sebring Sedan V6-2.7L VIN R (2004)
Front Door Exterior Handle: Service and Repair
EXTERIOR HANDLE
REMOVAL
1. Remove door trim panel.
2. Raise door glass.
3. Remove water dam as necessary to gain access.
4. Disconnect latch rod at door latch.
Fig. 18
5. Remove nuts attaching door handle to outer door panel (Fig. 18).
6. Remove outside door handle from door.
INSTALLATION
1. Position outside door handle on door (Fig. 18).
2. Install nuts attaching door handle to outer door panel.
3. Connect latch rod at door latch.
4. Install water dam.
5. Install door trim panel.
6. Verify door handle operation. Adjust door latch as necessary.