Sebring Sedan V6-2.7L VIN R (2004)
Trunk / Liftgate Switch: Service and Repair
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove left lower instrument panel cover.
3. Disconnect the wire connector.
4. Pinch four tabs around side of decklid release switch on the rear side of the left lower instrument panel trim, and push switch through opening.
INSTALLATION
1. Position the decklid release switch over opening of the left lower instrument panel trim, and push switch through opening.
2. Connect the wire connector.
3. Install the left lower instrument panel cover.
4. Connect the battery negative cable.
