Sebring Sedan V6-2.7L VIN R (2004)
Cowl Moulding / Trim: Service and Repair
COWL COVER
REMOVAL
1. Release hood latch and open hood.
2. Remove windshield wiper arms.
Fig. 4
3. Remove screws attaching cowl cover to cowl (Fig. 4).
4. Remove the seal, cowl screen to hood inner panel.
5. Remove clips attaching cowl cover to cowl plenum under hood to cowl bulb seal.
6. Remove cowl cover from vehicle.
INSTALLATION
1. Position cowl cover to vehicle.
2. Install clips attaching cowl cover to cowl plenum.
3. Install the seal, cowl screen to hood inner panel.
4. Install screws attaching cowl cover to cowl.
5. Install windshield wiper arms.
