Sebring Sedan V6-2.7L VIN R (2004)
20. Connect dome lamp wire connector to dome lamp.
21. Install sunroof opening.
22. Install headlining wiring harness to A-pillar and fuse panel.
23. Install upper quarter trim as necessary.
24. Install right and left B-pillar trim.
NOTE: It is not possible to reinstall the push in fasteners holding the wiring harness to the instrument panel bracket and to the fuse panel area.
Wrap these two fasteners with foam tape to prevent buzz, squeak, and rattle complaints (Fig. 16).
25. Install the A-pillar trim.
26. Install the weatherstrip on to door opening.
27. Verify that the door opening weatherstrip lip overlaps the edge of the headlining and trim panels.
