Sebring Sedan V6-2.7L VIN R (2004)
Coolant: Service and Repair
Adding Additional Coolant
STANDARD PROCEDURE
COOLANT - ADDING ADDITIONAL
NOTE: 2.0L/2.4L - The pressure cap should only be removed if the coolant recovery container is empty.
When additional coolant is needed, it should be added to the coolant recovery container (2.0L/2.4L)/ coolant pressure container (2.7L). Use only
50/50 concentration of ethylene glycol type antifreeze and distilled water.
STANDARD PROCEDURE - COOLANT SERVICE
For engine coolant recommended service schedule, (Refer to LUBRICATION & MAINTENANCE/MAINTENANCE SCHEDULES -
DESCRIPTION).
