Sebring Sedan V6-2.7L VIN R (2004)
Receiver Drier With Lines
4. Remove receiver/drier bracket bolt at base of receiver/drier and remove the receiver/drier and line.
NOTE: Cap condenser and evaporator while system is open to prevent moisture from entering system.
INSTALLATION
1. Install receiver/drier in bracket and tighten mounting bolt.
2. Install liquid line to expansion valve with a NEW O-ring and tighten to 8 Nm (71 in. lbs.).
3. Install liquid line to condenser with NEW O-rings and tighten nut to 19.2 Nm (170 in. lbs.).
4. Evacuate the refrigerant system.
5. Recharge the refrigerant system.
