Sebring Sedan V6-2.7L VIN R (2004)
1. Engage a torque wrench, with a maximum 2 inch extension in the 1/2 inch square opening of the tensioner bracket (Fig. 9).
2. Apply 141 Nm (104 ft. lbs.) of torque, counterclockwise to the tensioner bracket while tightening the upper fastener. Torque fastener to 28 Nm
(250 inch lbs.) (Fig. 9).
3. Remove torque wrench from tensioner bracket, and torque lower tensioner bracket fastener to 28 Nm (250 inch lbs.).
4. Verify proper belt tension.
USED BELT
1. Engage a torque wrench, with a maximum 2 inch extension in the 1/2 inch square opening of the tensioner bracket (Fig. 9).
2. Apply 96 Nm (71 ft. lbs.) of torque, counterclockwise to the tensioner bracket while tightening the upper fastener. Torque fastener to 28 Nm (250
inch lbs.) (Fig. 9).
3. Remove torque wrench from tensioner bracket, and torque lower tensioner bracket fastener to 28 Nm (250 inch lbs.).
4. Verify proper belt tension.
POWER STEERING PUMP BELT TENSIONING
1. Insert a 1/2" drive breaker bar into the square opening on the power steering pump bracket.
2. Hold clockwise pressure on power steering pump bracket and tighten adjusting bolt.
3. Verify proper belt tension.
